• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

As it applies to painting moulding on a wooden-structure house, most people choose to remove it through harsh substances, or by using grinders, which is labor-intensive and may damage the moulding.
Yet, there are simpler method that saves the molding and calls for tools and manual labor.

Before you begin painting your moldings, opt for a specific type of paint. Moldings paint specifically designed trim work are advisable since these paints contain low-VOCs, hold strongly to surfaces, and dry quickly.
Moreover essential to pick a paint that matches the gloss level you desire for your moldings.

To ready the moulding for painting, start by dusting it thoroughly with a soft-firmly held broom.
In any stubborn spots, softly clean the area with a clean rag dampened by water but make sure not to wet the moldings.
Allow the surface to be fully dry.

Protect the surrounding areas including the floors and walls with a high-grade tarpaulin.
Using painter's tape to seal the edges is also a great idea to prevent the paint from leaking.
Although, make sure that the film are pressed closely to the moldings to stop paint leakage from it.

Once you're done prepping the area, apply a layer of primer to your molding, if necessary.
The primer assists form a smooth surface for coating application.
Use a high-quality sealer that's especially made for trim work and let it dry according to the manufacturer's instructions.

It's now the time to paint your moldings through a high-grade brush or roller.
While painting on brush, покрасить дачный дом снаружи position at about a 45-degree inclination.
Work from the top to to stop drips, and attempt to apply smooth strokes to stop paint deposit on the moldings.
If you choose a roller, utilize an extension pole to access hard-to-reach areas.
Work in thin coats to prevent drips.

Achieve a finish, permit each layer to follow the manufacturer's instructions to the supplier's guidelines prior to applying another coat.
The process may take several hours depending on paint used in.
If you want a glossy sheen, add a coat of polyurethane once the coating is fully dry.

When you are finished painting, delicately remove the painter's tape without pulling off the coating by gently peeling the tape back and submerging the edges with a damped cloth in case paint is still attached to the tape.

In conclusion, painting molding leaving it from a forested house requires a little effort but gives you the result you want without significant mess and damage.