• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back whenever they want without needing to let them in or out. They also help prevent your cat from toileting in the house.

It is simpler to install an animal flap on a upvc panel than one made of glass however, you'll require some expertise and right tools.

Take a measurement of the door

Fitting a cat flap in a door can be tricky but as long as you use the correct type of cat flap, take your time and follow the directions provided, it shouldn't be a problem. We will be showing how much to install a cat flap to trace the shape, then use the jigsaw to slice the area in the door and then finish the job by attaching the cat flap bifold doors flap to the door. This will ensure that the flap remains in place and shields the door from rain and wind damaging the door.

To determine the size of the cat flap you need, measure the width of your pet. This will enable you to choose a cat flap that is big enough to allow your pet to walk into the house and exit without needing to open the door every time.

Once you have the measurements you can mark out where on the door the template should be placed, usually this is done with an X, however some kits come with an illustration that outlines the location to drill, if you have one, then attach it to the door and draw a line around the door. If your door has a sill or moulding at the bottom, make sure you leave plenty of space between your cat and these elements.

Put on your eye protection as well as a dust mask and using a jigsaw begin to cut according to the lines you penciled in. Don't press the blade too hard because this will cause it to cut faster than you would like it to. Utilize a set square to ensure that you're cutting the material correctly and that the cut is a rectangle shape. When you are happy with the final result, you can take the door material off.

Draw a Line

The cat flap lets you to let your pet inside and out without worrying about unwanted visitors or unwelcome gifts. It also prevents draughts, and helps keep your home's temperature steady. However, putting a cat flap in your door might seem like an overwhelming task for those who've never done it before. This can lead many to hire a professional carpenter or joiner to do the job. This is a viable option, however you can do it yourself, provided the tools are right and the directions are followed.

It is much easier to do on a wooden door, but it is possible with uPVC. However you should be cautious not to damage the doors since this could make it impossible to claim your warranty. First, you need to examine the door's measurements to make sure it will accommodate the new cat-flap. This should be simple enough when you have a standard uPVC door, but you may require more care if using a composite or other type of door as these can be more difficult to cut into than solid uPVC panels.

The next step is to determine the belly height of your cat. This is the height from the floor to the underside of the cat's stomach, and you'll need to locate a place in the door that will be within the range your cat can comfortably pass through. Once you have the information, you'll need to mark the area using a spirit level and a pencil so you are sure that the hole will be suitable for your cat.

After you have marked the area, it's now time to cut the hole. You will need a jigsaw and it is crucial to take your time to ensure that the cuts are clean and smooth rather than uneven and rough, since it could cause damage to your door. Be sure to wear safety glasses and a dust-proof mask at all times when using the jigsaw, since breathing in the dust could be hazardous to your health. After you've completed the cutting, you'll have to smooth the edges of the hole with sandpaper so that your cat flap will fit easily in place.

Cut a Hole

It can be difficult to install the cat flap onto the door panel or double glazing unit. You might be tempted to do it yourself, but unless you have a lot of expertise in DIY, it's likely to be best to have an expert to complete the job for you. A mistake in the process may not just be ugly, but it could also be an enigma for security as well as allowing cold air to enter when the cat is outside, and hot air to escape when inside.

The first thing you need to do is mark out the location of the hole in the door with pencil and a spirit level. This will ensure that it is placed and runs in a straight line with other parts of the door. It is important to have some sandpaper on the ready to smooth out any rough edges.

After the line is traced, you must cut the hole using a jigsaw, remember to wear any safety equipment when working with a power tool. If you are concerned about the noise of the jigsaw, you can purchase an electric version that is quieter and simpler to use.

It is crucial to only cut away the material that is required for the fitment of the cat flap. A small amount of material will be needed to cover the thickness of the wall of the cat Flap in upvc door panel flap itself but removing more than that can cause problems and even cause damage to the door frame.

If the upvc door has a metal panel or frame, it could interfere with the microchip flap. In this situation, you will need to create an extra-large hole to ensure that the metal does not touch the wall of the flap.

If you're looking to install a cat flap into windows made of double-glazed or upvc with metal frames it is necessary to speak with a specialist. They will provide you with a new piece of glass with the hole that is already designed for the cat flap. This is less expensive than trying to fit the flap into an existing pane of glass that wasn't designed specifically for this purpose.

Install the Flap

Cat flaps give your pet the freedom to come and go whenever they like and let them relax in the house when they'd like. However, if you own a upvc door panels cat flap door, it may be difficult to fit a cat flap, particularly in the absence of a glass pane that can be cut to fit one. If you are willing to install a half-glazed uPVC replacement panel, it is possible to install the cat flap. It's not just a matter of drilling an opening in the door. You'll also have to take a few steps to ensure it's secure.

A composite, upvc door panel with cat flap fitted, or GRP door panel is typically composed of a thin plastic skin which is bonded to an insulating polystyrene base. The material is quite fragile and care should be taken when cutting through it to avoid damaging. This kind door comes with a template that you can use to make the hole.

After you have marked out the opening in your front door, it's time to put in the cat flap. You can buy and fit various models, from basic push-button operated models to microchip-activated ones that only let in your pet. However, regardless of what kind of cat flap you select, it's important to make sure that your cat can use the flap without getting stuck outside in the rain.

It's a good idea opt for circular fittings rather than one that is square, since circles can be more securely cut into the door glass. This is because square holes make the glass more susceptible to cracking when drilling is applied to it. It's also a much safer choice to use since you don't risk having to drill into toughened glass that may break and injure your pet or your family. This is particularly crucial if you have a child or elderly person at home who could be injured by shards glass.