• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Cat flaps allow your pet to leave and come back door with cat flap fitted at their own pace, without needing to let them in or out. They also can help to keep your cat from having to go to the bathroom in the house.

It is simpler to install a cat flaps for french doors flap on a upvc panel than one made of glass but you'll require some expertise and appropriate tools.

Take a measurement of the door

The installation of a cat flap in a front door can be difficult however, provided that the cat flap is the appropriate one and you follow the guidelines you can make it less difficult. We will show you how to draw the shape, use the jigsaw to slice the area in the door and then finish off the job by securing the flap to the door. This will ensure that the flap remains in place and protects the door from wind and rain damaging the door.

The first thing to do is determine the width of your pet to determine an accurate estimate of what size of cat flap you will require. This will let you select a cat flap that is large enough for your pet to enter the house and leave without needing to open the door every time.

Once you have the measurements you can mark out the area on the door where the template should be placed, usually this is done with an X, but some kits come with an illustration that outlines where to drill, if yours does, then you can stick it to the door and draw a line around the door. If your door has a moulding or sill on the bottom edge ensure you have enough clearance from these because this will keep your cat safe and stop them from gaining access to your home.

Put on your eye protection and a dust mask and using a jigsaw begin cutting according to the lines you have pencilled in, don't try to push the blade too hard as this can cause it to cut more quickly than you'd like it to. If you have a square that you have cut, use it to check that you're cutting properly and to make sure the hole is a good rectangular shape. Once you are satisfied with the shape, you can begin to take off the remaining door material.

Draw a Line

The cat flap is a great way to let your pet out and in without worrying about them coming in with a visitor, or leaving unwanted gifts in the house. It also stops draughts and keeps your home's temperature in check. However, installing the cat flap to your door could be an overwhelming task for those who've never done it before. This can lead many people to call a professional joiner or carpenter to complete the task. This is an option but you can do it yourself if your tools are in order and the instructions are adhered to.

This is much easier to do on doors made of wood, however it is possible with uPVC. However you should be cautious not to harm the doors as this could make it impossible to claim your warranty. The first step in the process is to take measurements of the door, making sure that it will be able to accommodate the new cat flap. If you have an ordinary uPVC panel it should be a breeze. However in the case of composite or another type of door, you may have to be more cautious.

The next step is to determine the height of your cat's belly. This is the measurement from the floor to the underside of the cat's stomach, and you will need to find a spot in the door where this measurement will fall within the range your cat is able to comfortably walk through wall cat flap. Once you know this you'll need to mark out the area with a pencil and a spirit level to ensure that the hole you create will fit your cat.

After you have marked the area, you're now ready to cut the hole. You will need the jigsaw, and it is important that you take your time in order to ensure that the cuts are smooth and clean instead of uneven and rough, as it could cause damage to your door. Wear safety glasses and a dust mask while working with the Jigsaw. Inhaling sawdust is hazardous for your health. After you have finished cutting the hole, you will require sandpaper for smoothing the edges so that the cat flap is easily inserted.

Cut a Hole

Installing a cat flap to an existing door panel or double glazing sealed unit can be quite difficult. You might be tempted to tackle the job yourself, but unless you have a lot of experience in DIY it is recommended to hire a professional to do the task for you. A mistake in the process may not only look ugly, but also a security risk and also allow cold air to get in when the cat is outside and hot air to escape inside.

The first thing you have to do is draw the position of the hole in the door with pencil and a spirit level. This will ensure that it is placed and runs parallel to other parts of the door. You should make sure you have some sandpaper on ready to smooth any edges.

Wear any safety gear you require when working with an electric tool. If you're worried about the noise, you can get an electric jigsaw that is more quiet and easy to use.

It is crucial to only cut away the material needed for the fitment of the cat flap. It is important to leave a little extra material to cover the wall of the flap. However cutting away too much could cause issues or even damage the door frame.

If the door is made of upvc and has a metal panel or frame, it may interfere with the microchip flap. In this situation you'll need to create an extra-large hole to ensure that the metal does not touch the wall of the flap.

If you're looking to install a cat flap in a double-glazed or upvc window cat flap with frames made of metal you'll need to talk to an expert. They can provide you with a new piece of glass that has the hole that is already designed for the cat flap. This will be less expensive than fitting a cat flap inside an existing pane that wasn't designed specifically for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to come and go whenever they want, allowing them to relax in the house when they'd like. If you've got an uPVC door, it may be difficult to fit an animal flap, especially if you don't own glass panes that could be cut to fit one. If you're willing to buy and install a replacement half-glazed uPVC panel, it's possible to add the cat flap to the doors. It's not a matter of slicing a hole into the door. It is also necessary to take a few steps to ensure it's secure.

A composite door panel is typically made up of a flimsy plastic outer skin that is bonded to a soft, polystyrene insulating core. The material is fairly fragile and care should be taken when cutting into it to avoid damaging. This type of door typically includes a template which you can use as a guide for cutting the hole in your door.

After you've marked the location of the hole in your door, now it's time to fit the Cat Flap In Upvc Door Panel flap itself. You can pick from a variety of options, from simple push-button units to microchip activated ones that allow only your pet to enter. No matter which type of cat flap you pick it's essential that your cat can use the flap comfortably without getting stuck in bad weather.

A circular fitting cat flap in upvc door panel is superior than a square one, as circles can be cut more securely into glass. This is because square holes are more likely to break the glass when they are drilled. This is also a safer choice because you won't need to drill into the toughened glass which could break and cause harm to your pet or family. This is particularly important if there are children or elderly people in your home that could be injured by glass fragments.